NAD M22 V.2

NAD

SKU:NAD_M22_V2

$4,200.00 Sale price

Regular price $4,200.00

NAD M22 V.2 Stereo Power Amplifier

The M22 V2 is using the latest nCore™ amplifier technology licensed from Hypex to provide a nearly ideal amplifier with distortion below measurement, ultra-high damping factor, and unconditional stability with any speaker. Tight, detailed sound with amazing control and transparency gets the best performance available. With nCore, Hypex has refined their UcD concept to new levels of perfection by improving the modulator for more accurate feedback subtraction and PWM generation. The all-discrete driver and output stage have also been improved for lower open-loop THD as well as lower idling losses, normally conflicting requirements with conventional IC driver circuitry. An added control loop incorporating an integrator with adaptive clipping enables 20dB more feedback to be used across the audio band because of its extremely low-phase shift resulting in a dramatic reduction in distortion across the audio band. This is added to UcD’s already amazing characteristics of load invariance and high current capability, common characteristics of great-sounding amplifiers. 

Effortless Power

Employing the latest generation of digital PowerDrive™, the M22 V2 offers a minimum of 300W per channel with amazing reserves of dynamic power at lower impedances. The M22 V2 is capable of >400W dynamic power per channel even in 8 ohms, >700W in 4 Ohms, and 1,000W in 2 ohms. Need more power? Select Bridge Mode and the M22 V2 offers 950W at 8 Ohms in Mono. It can effortlessly power any loudspeaker to live performance levels with amazing efficiency and low power consumption. Control for PowerDrive is derived by sensing the average output power, applying a time constant, and then cleanly hard clipping the signal thus limiting it to the rated continuous clipping power over a sustained loading. By controlling the power envelope maximum clean power is obtained for every operating condition. 

Perfecting Performance

The output stage is only one of several circuits in the amplifier, and each must complement the other to obtain optimal performance. The amp is DC coupled throughout, from input to output, there is no capacitor in the forward signal path. Yet, it has a beneficial 12dB/octave roll-off below 2Hz. It does this using a unique circuit topology that is functionally a forward servo. It is however not a servo in the traditional sense as it does not measure DC at the output and send back a correction signal. Instead, part of the input signal is fed to a side chain with a second-order low-pass filter. The output of this is subtracted from the forward signal input to the second stage thus rejecting DC.

Clean and Dynamic

The performance of the entire signal path is critically dependent on the power supply; in this case a well regulated, but not too tight, custom switch mode design. This allows maximum dynamic power, very high current yet with very low distortion. Secondary supplies are individually regulated and decoupled at each opamp for lowest possible noise and maximum dynamic range.

  • Power increases 20% from 250 Watts X 2 to 300 Watts X 2
  • Redesigned power supply enables the increase in power
  • PowerDrive circuit is fine-tuned to maximize dynamic power.
  • Bridging mode transforms M22 V2 into a 900W mono amplifier
  • nCore™ technology by Hypex delivers near ideal amplifier performance
  • 3 position auto turn-on sensitivity switch allows for improved system matching

Download NAD M22 Product Sheet here.

Find out more at www.nadelectronics.com

Product Warranty

NAD: 2 Years Limited Warranty

PSB Speakers: 2 Years Limited Warranty

Bluesound: 1 Year Limited Warranty

 

Terms and Conditions

1. This warranty is applicable for products bought in Singapore and from this Online Store only.

2. This warranty of this product is guaranteed against manufacturing defects from the date of purchase, proof of purchase date is required.

3. This warranty is only applicable to the original purchaser and shall not be transferable, negotiable or assignable to any third party.

4. This limited warranty shall not be valid in the following situations.

  • The product is found to have been tampered, modified, serial number defaced, removed or repaired by an unauthorised person.
  • Malfunctions or damages resulting from natural disasters, fire, civil unrest and/or accidents.
  • Defects from using wrong electrical supply, misuse or consequential damage by negligence and abuse.
  • Usage not in accordance with instructions in the Owner's Manual.
  • Normal wear and tear.

5. This warranty shall be subject to the following limitations and exclusions.

  • The Buyer shall be fully responsible for the due delivery to us of the equipment for any work which shall need to be done pursuant to this warranty and for the subsequent collection thereof the equipment after the said work has been done.
  • This warranty does not include transport or handling charges incurred in the transportation of the equipment to and from the Service Centre.
  • Our decision on all questions relating to complains as to defects either of workmanship of materials shall be conclusive and the buyer shall agree to abide by such a decision. Any equipment or defective part which has been replaced shall become our property.
  • The buyer waives all or any claims to compensation monetary otherwise which may be entitled to and shall agree to accept any compensation whatsoever by way of additional repairs or otherwise which we in our absolute discretion deem fit to offer.

6. The following items/ accessories as specified below shall not be within the scope and purview of this warranty.

  • Remote control unit, cables/ cord assembly, antennae, batteries, adaptors, battery pack, external parts and extruded parts such as cabinets, front panel, casing, cover, phono cartridge, stylus, lid and levers, plugs, sockets, control knobs/ buttons, etc. 

7. Request for warranty services within the warranty period must be accompanied with a proof of purchase from our authorised dealers or by us.

 

Return / Exchange Policy

For Damaged or Incorrect Items Delivered only.

  • Returns are only allowed for damaged terms due to manufacturing or incorrect item delivered, we will exchange you with a new or correct set.
  • Inform us within 7 calendar days from the date you receive it.
  • Items’ value shall not be remarkably decreased due to your usage or consumption.
  • The original receipt (or gift receipt) and original packaging must be presented upon return.
  • Ensure that the item(s) you’re returning is repackaged with all the cords, adapters and documentation that were included when you received it.
  • Exchanges are subjected to stock availability.
  • For price differences, a top-up in amount will be requested or refund will be processed, where applicable.

Please feel free to contact us at (65) 6748 3137 or (65) 6295 1233 for any enquiries regarding product warranty and exchanges.

NAD M22 V.2 Stereo Power Amplifier

The M22 V2 is using the latest nCore™ amplifier technology licensed from Hypex to provide a nearly ideal amplifier with distortion below measurement, ultra-high damping factor, and unconditional stability with any speaker. Tight, detailed sound with amazing control and transparency gets the best performance available. With nCore, Hypex has refined their UcD concept to new levels of perfection by improving the modulator for more accurate feedback subtraction and PWM generation. The all-discrete driver and output stage have also been improved for lower open-loop THD as well as lower idling losses, normally conflicting requirements with conventional IC driver circuitry. An added control loop incorporating an integrator with adaptive clipping enables 20dB more feedback to be used across the audio band because of its extremely low-phase shift resulting in a dramatic reduction in distortion across the audio band. This is added to UcD’s already amazing characteristics of load invariance and high current capability, common characteristics of great-sounding amplifiers. 

Effortless Power

Employing the latest generation of digital PowerDrive™, the M22 V2 offers a minimum of 300W per channel with amazing reserves of dynamic power at lower impedances. The M22 V2 is capable of >400W dynamic power per channel even in 8 ohms, >700W in 4 Ohms, and 1,000W in 2 ohms. Need more power? Select Bridge Mode and the M22 V2 offers 950W at 8 Ohms in Mono. It can effortlessly power any loudspeaker to live performance levels with amazing efficiency and low power consumption. Control for PowerDrive is derived by sensing the average output power, applying a time constant, and then cleanly hard clipping the signal thus limiting it to the rated continuous clipping power over a sustained loading. By controlling the power envelope maximum clean power is obtained for every operating condition. 

Perfecting Performance

The output stage is only one of several circuits in the amplifier, and each must complement the other to obtain optimal performance. The amp is DC coupled throughout, from input to output, there is no capacitor in the forward signal path. Yet, it has a beneficial 12dB/octave roll-off below 2Hz. It does this using a unique circuit topology that is functionally a forward servo. It is however not a servo in the traditional sense as it does not measure DC at the output and send back a correction signal. Instead, part of the input signal is fed to a side chain with a second-order low-pass filter. The output of this is subtracted from the forward signal input to the second stage thus rejecting DC.

Clean and Dynamic

The performance of the entire signal path is critically dependent on the power supply; in this case a well regulated, but not too tight, custom switch mode design. This allows maximum dynamic power, very high current yet with very low distortion. Secondary supplies are individually regulated and decoupled at each opamp for lowest possible noise and maximum dynamic range.

  • Power increases 20% from 250 Watts X 2 to 300 Watts X 2
  • Redesigned power supply enables the increase in power
  • PowerDrive circuit is fine-tuned to maximize dynamic power.
  • Bridging mode transforms M22 V2 into a 900W mono amplifier
  • nCore™ technology by Hypex delivers near ideal amplifier performance
  • 3 position auto turn-on sensitivity switch allows for improved system matching

Download NAD M22 Product Sheet here.

Find out more at www.nadelectronics.com

Product Warranty

NAD: 2 Years Limited Warranty

PSB Speakers: 2 Years Limited Warranty

Bluesound: 1 Year Limited Warranty

 

Terms and Conditions

1. This warranty is applicable for products bought in Singapore and from this Online Store only.

2. This warranty of this product is guaranteed against manufacturing defects from the date of purchase, proof of purchase date is required.

3. This warranty is only applicable to the original purchaser and shall not be transferable, negotiable or assignable to any third party.

4. This limited warranty shall not be valid in the following situations.

  • The product is found to have been tampered, modified, serial number defaced, removed or repaired by an unauthorised person.
  • Malfunctions or damages resulting from natural disasters, fire, civil unrest and/or accidents.
  • Defects from using wrong electrical supply, misuse or consequential damage by negligence and abuse.
  • Usage not in accordance with instructions in the Owner's Manual.
  • Normal wear and tear.

5. This warranty shall be subject to the following limitations and exclusions.

  • The Buyer shall be fully responsible for the due delivery to us of the equipment for any work which shall need to be done pursuant to this warranty and for the subsequent collection thereof the equipment after the said work has been done.
  • This warranty does not include transport or handling charges incurred in the transportation of the equipment to and from the Service Centre.
  • Our decision on all questions relating to complains as to defects either of workmanship of materials shall be conclusive and the buyer shall agree to abide by such a decision. Any equipment or defective part which has been replaced shall become our property.
  • The buyer waives all or any claims to compensation monetary otherwise which may be entitled to and shall agree to accept any compensation whatsoever by way of additional repairs or otherwise which we in our absolute discretion deem fit to offer.

6. The following items/ accessories as specified below shall not be within the scope and purview of this warranty.

  • Remote control unit, cables/ cord assembly, antennae, batteries, adaptors, battery pack, external parts and extruded parts such as cabinets, front panel, casing, cover, phono cartridge, stylus, lid and levers, plugs, sockets, control knobs/ buttons, etc. 

7. Request for warranty services within the warranty period must be accompanied with a proof of purchase from our authorised dealers or by us.

 

Return / Exchange Policy

For Damaged or Incorrect Items Delivered only.

  • Returns are only allowed for damaged terms due to manufacturing or incorrect item delivered, we will exchange you with a new or correct set.
  • Inform us within 7 calendar days from the date you receive it.
  • Items’ value shall not be remarkably decreased due to your usage or consumption.
  • The original receipt (or gift receipt) and original packaging must be presented upon return.
  • Ensure that the item(s) you’re returning is repackaged with all the cords, adapters and documentation that were included when you received it.
  • Exchanges are subjected to stock availability.
  • For price differences, a top-up in amount will be requested or refund will be processed, where applicable.

Please feel free to contact us at (65) 6748 3137 or (65) 6295 1233 for any enquiries regarding product warranty and exchanges.